Bayesian Reliability Updating of Existing Steel Girder Bridges
Bayesian statistics is used to update the reliability of existing composite steel girder bridges. A 60 ft. long simply supported superstructure is considered. The reliability for the ultimate...
Damage Dependent Micromechanics in Metal Matrix Composites
A computational approach is used herein to model the effects of processing induced thermal residual stresses on radial, hoop, and shear stresses at the fiber/matrix interface in a continuous...
Debonding of a Inhomogeneity from a Plastic Matrix
Inclusion debonding is addressed through the formulation and solution of the planar elastic and elastic uniform plastic problems. These problems are variants of the standard transformation...
Relationships Between Error Estimation and Adaptive Computations in Strain Localization
In this work, the a posteriori error estimates and the h mesh refinement techniques using hierarchical finite element shape functions are tailored for numerical simulations of strain localization...
Analysis of Internal Discontinuities in Geo-Materials
A new approach for modeling localized deformations is proposed. This approach uses an interface element to model the shear band. A successful capture of the kinematics of a failure mechanism...
Direct Tensile Test: Stability and Bifurcation
Unnotched specimens of quasibrittle materials that exhibit post-peak strain softening do not deform symmetrically in a direct tension test. The phenomenon (which is similar to the recently...
Two-Dimensional Statistical Micromechanical Models for Microcracked Brittle Solids
Recent development undertaken by the authors in two-dimensional statistical micromechanical models for brittle solids with randomly located interacting microcracks is presented. Overall...
The Initiation of Bifurcations and Localization in Damaging Materials
Criteria for diffuse and discontinuous bifurcations have previously been developed and used to investigate the initiation of necking and localization in elastic-plastic materials. In this...
Softening Models for Concrete: Stability and Uniqueness
A microstructurally-based, numerically oriented, fracture-induced softening model for concrete is presented. Rate-dependent evolution equations for microcrack nucleation, growth, and coalescence...
Computer Simulation of Direct Shear Test
This paper presents a pilot study of a computer simulation of direct shear test on sands using the Discrete Element Method. The numerical test setup is described first, which is followed...
Contact Induced Damage
Contact induced damage is an important source of potential failure of engineering components. The particular applications where this damage occurs are in the automotive, aerospace and...
A Shear Locking Free Three-Node Triangular Plate Bending Element for Moderately-Thick and Thin Symmetrically Cross-Ply Laminated Plates
A shear locking free three-node triangular plate bending element based on Reissner/Mindlin theory for symmetric general cross-ply laminated plates is developed. The element has total nine...
Stress Wave Interaction in Finite Beam on Elastic Foundation
The short-time behavior of a finite Timeshenko beam on a Winkler foundation subjected to step and impulse loadings is presented. The transient behavior was analyzed by using the method...
Shear Flow Between Walls in Relative Motion
The paper reports on experiments on Couette flow, i.e., the shear-induced flow between surfaces which are in motion relative to each other. The novel aspect of the work is the appearance...
Evolution of Damage in Brazilian Test Using Holographic Interferometry
A common method for estimating the tensile strength of concrete is the Brazilian Test. The test is carried out by loading a cylinder on its side in diametral compression. Accodring to...
Harmonic Excitation of an Unconstrained Saturated Particle Bed
Past research on the flow of concentrated cohensinless mixtures have historically emphasized steady or quasi-steady motions while dynamic effects have received little attention in comparison....
Postbuckling Behavior of Stiffened Composite Shell Panels
The paper summarizes the current status of an ongoing study on the postbuckling behavior of thick and moderately thick composite stiffened shells. Axially compressed moderately thick panels...
Leakage Characteristics of the St. Jude Heart Valve
The requirement for anticoagulant therapy in patients implanted with mechanical heart valve prostheses is well known. A plausible explanation for this requirement is that the leakage flow...
Intra Vena Cava Balloon Pumping
An innovative prototype intravenous hollow-fiber oxygenator was developed in 1984 by B.G. Hattler. The device consisted of a microporous, hollow-fiber membrane oxygenator inserted into...
The Effective Stress Path for Soil at High Pressure
The effect of increasing stiffness in the soil skeleton on the effective stress path in undrained triaxial compression tests is experimentally examined and found to not be significant....
Return to search